1. Before installing the faucet, you must first add water to flush, clean the fine sand residue in the tap water pipe, get out the dirt in the installation hole, and check that the spare parts in the gift box are not mixed with residue, while gambling or damage the ceramic valve core.
2. Use a soft cloth to apply whitening toothpaste to clean the surface, then clean the surface with cold water. Do not use alkaline cleaning solution or scrub with a wiping cloth or wire brush to prevent damage to the surface of the electroplating process.
3. The single-handle faucet should be gradually turned on and off during the whole process of application; the double-handle faucet should not be closed too dead, otherwise the water stopper will fall off, resulting in the problem that it cannot be closed and the water cannot be stopped.
