1. Immediately clean up after application, wipe and store, and try not to allow water droplets to remain on the surface of the stainless steel sink, because the water of the high-speed rail motor car will cause rust, and the water with high mineral content will cause white film.
2. If there is mineral sedimentation at the bottom of the stainless steel sink, it can be removed by adding vinegar of the diluent first, and then rinsed with tap water.
3. Do not touch hard blocks or rusted objects with the stainless steel sink for a long time.
4. Do not leave vulcanized rubber pads, wet sponges or cleaning sheets in the stainless steel sink overnight.
5. Pay attention to household products containing fluoride, bleach, food and its silver-containing cleaning products, sulfur content, and hydrochloric acid cleaning products that may potentially damage stainless steel sinks.
6. Note that the vapor released by the bleach solution or organic chemical cleaning solution placed in the overall cabinet will corrode the bottom of the stainless steel sink.
7. If the organic chemical composition or the electric soldering iron solution comes into contact with the stainless steel sink, be sure to clean the stainless steel sink immediately.
8. Don’t put Paula, salad dressing, mustard and salted food in the stainless steel sink for a long time.
9. The specifications and models of the drainage outlet are DN32DN40, and there are some differences between the inner wire and the outer wire of the drainage mouth.
10. There is also a U-shaped bend under the drain which is used to deodorize and prevent insects. The general U-bend often has an inspection hole, which is convenient to remove the dirt in the pipeline.
